$ 34
4.5 (185)
In stock
Arrives by Tomorrow
.
Order within 00 hr 00 min
Save $6.80 off this item after joining.
Description
It is 3/8″ thick which is much thicker and stronger then the competition as well! Used to hold the yoke in place while applying torque on the nut/pinion nut and for setting bearing pre-load. Perfect for loosening stubborn pinion nuts or for high torque applications such as a crush sleeve that requires 250 ft. lbs. Uses a 1/2″ breaker bar and/or a 3/4″ pipe for leverage. Fits 1310, 1330, 1350, 1410, and many more sized u-joints yokes, and flanges. Includes Directions. Fits many style yokes or flanges, axles or transfer cases. Use a breaker bar to loosen or a torque wrench to tighten retaining nut to spec.
